Adjustable Heavy Duty Toggle Latch installation and precautions
Rubber Adjustable Heavy Duty Toggle Latch installation method, do a brief introduction: usually only Adjustable Heavy Duty Toggle Latch manufacturers need 6 steps to complete the installation:
1. Unlockable Adjustable Heavy Duty Lock Tile Tilt beneath the tires, the adjustable heavy-duty switch has a nail facing the ground, with the side of the hook facing the outside of the car.
2. Will be Adjustable Heavy Duty Toggle Latch on the inside of the truck to adjust the type of heavy-duty switch lock hook at the hook connection, so that the internal adjustable heavy-duty switch buckle bite into a circle.
3. Connect the hooks at the outside of the adjustable duty-change latch to allow the outer adjustable heavy-duty switch to snap into a circle.
4. The rubber ring tread, his hands stretched several times, so that the rubber ring to relax.
5. With a rubber ring connected to the front of the Adjustable Heavy Duty Toggle Latch on the outside of the four adjustable heavy-duty switch buckle a double hook, and correct the four sides symmetry.
6. And then the remaining four single steel hooks to complete the installation.
In the use of Adjustable Heavy Duty Toggle Latch to pay attention to the following aspects:
It is best to adjust the lock before the trip can be adjustable heavy, and not in the face of snow and ice after the installation, because the temporary parking to install Adjustable Heavy Duty Toggle Latch than the early installation of trouble, is not conducive to safety. Install and disassemble the vehicle in a safe area before dismantling. On the busy road, you need to set the necessary traffic warning signs.
Do not install an Adjustable Heavy Duty Toggle Latch in the case of a flat tire.
Adjustable heavy-duty switching buckle also has a size limit, suitable for different wheel size and tire width, pay attention to select the wheel size matching Adjustable Heavy Duty Toggle Latch. Install the adjustable heavy-duty switch, the speed is generally not more than 40Km / hour, and pay attention to avoid sudden acceleration or deceleration as much as possible.
When the vehicle into the need to use Adjustable Heavy Duty Toggle Latch the road when the timely removal of Adjustable Heavy Duty Toggle Latch.
Adjustable heavy duty switch is not designed for trailers and tractors.
In the cold area, some owners self-made Adjustable Heavy Duty Toggle Latch, so that although the problem can be solved temporarily, but not worth promoting.
Adjustable Heavy Duty Toggle Latch market price and quality of good and bad, it was just beginning to 4-6 hundred Adjustable Heavy Duty Toggle Latch King far away, that the price is high, but in turn think about a car designer for your Car carefully customized "good shoes", eliminating the need to worry about your driving, compared with personal safety, can be described as value for money. Last year saw the report that someone spent more than 300 yuan to buy a set of Adjustable Heavy Duty Toggle Latch, only a few hours on the road, the "chain" of the. Think about what is dangerous and unthinkable if this happens in a road full of snow on the road. Therefore, the proposed owners in the purchase decision-making, be sure to purchase with a safety production license logo of the regular products, so that the wheels on the set of poor quality (or counterfeit) adjustable heavy-duty switch can not play the role of non-slip, on the contrary Will increase the chance of accidents.